How to setup R4i SDHC to v1.4.1?

1. From 2010, products labeled “V1.4.1” support NDSI V1.4.1 hardware upgrade, please download V1.27b kernel.
2. Products labeled “V1.4” do not support NDSI V1.4.1 hardware upgrade temporarily, please do not upgrade your NDSI to V1.4.1 version. We are solving this issue.We feel terribly sorry for any inconvenience it may cause.
source:r4i-sdhc.com/downloade.asp
if you r4i sdhc can not upgrade ,maybe you should get a new card which support 1.41 version software.

iSmart premium 1.03 kernel

iSmart premium 1.03 kernel

The iSmart DS team have released kernel 1.03 for the iSmart premium. The main addition to the kernel is special mode as seen on several recent devices- a mode that runs with minimal patching which coupled with other features means AP checks are bypassed. It comes at the cost of no cheats and things like that.

iSmart premium 1.03 kernel download

Those that frequent the ismart support forums and the like might have seen fishshell being developed. Based on moonshell it started out as something of a Chinese localisation of moonshell but in this case has since grown into a kernel/shell replacement for the iSmart premium. It is not quite at full release yet but well worth a look.

Supercard dstwo iReader v1.1 Update

- The iReader plugin for the SuperCard dstwo has received a minor update from 1.1 to, yes, 1.1 again (25/10/1910)
- The GBA Emulator plugin has also been updated to v1.3
- And finally SCDSTwo EOS has been updated to v1.08

21920-iReader_v1.1_en.zip:
http://filetrip.net/ajax.php?action=download&id=21920

• iReader can recognize the file type which supports by the extensions.
will display ZIP file as a folder, there are 3 display fliter: "All”, "Book” and “Picture”.
• Added Press R to next page when portrait reading
• Fixed the missing letter bug in some font sizes when portrait reading
• Improved pic zoom, now you can view pic as 25% 50% 75% 100% 150% 200% 300% 400%
• Added big pictures support
• Fixed the bug of cant zoom or rotate
• Fixed some bugs of BMP picture reading
• Improved bookmark save function. Now you can save more than 10 bookmarks for each file. Even more if you want!

NOTE:
Because some codes of bookmark save function had changed, so you can use old version bookmarks with thise new version iReader, Please delete old bookmarks!

iReader 1.1 (25/10/1910)
The problem with the stalling of the NDS in closing and opening is solved

GBA Emulator v1.3
Emulation kernel updated, improved game compatibility
Shining Soul is now

EOS v1.08
File System problem.
Save problem with Summon Night (J) & Summon Night 2 (J) are resolved.
Pokemon Black connection crash problem solved.
Touch Menu bug in Real Time resolved.
Note: Old Patch database does not work with the new OS version

How to upgrade acekard 2i with firmware 1.4.1 fix

Acekard2i firmware 1.4.1 Fix for dsi and how to upgrade.
Acekard2i working perfectly on DSi 1.4.1 !
http://filetrip.net/f12918-Firmware-Update...-1-4-1-1-0.html

There are two files included in the archive.
To apply the fix, you must have a DS Lite or a DSi with firmware version 1.3 or below or firmware 1.4 if you applied the 1.4 fix previously.
If you're using a DS Lite, run ak2ifw_update_141_DSL.nds and if you're using a DSi, run ak2ifw_update_141_DSi.nds

R4iTT support for DSI 1.41

R4iTT 3D Upgrade cart released its latest R4iTT 1.41 Updation Patch for Nintendo DSi 1.41 Firmware

Updation.

R4iTT released its latest R4iTT 1.41 Updation Patch for DSi 1.41 Firmware Updation on Sep 11th, 2010.

R4iTT 3D Upgrade is owned by www.r4itt.net, manufactured and designed by Original R4DS and Original DSTT. R4iTT can be used on Nintendo DSi XL, DSi LL, DSi V1.41, DSi, DS Lite and DS. It is an integration of Design and Development from Original R4DS and Original DSTT team.

R4iTT Main features:

1.Wi-Fi upgrade firmware for ever

2.An Integration of Design and Development from Original R4 and Original Dstt

3.Compatible R4(R4i) and DSTT(DSTTi) all funtions

4.Compatible all dsixl/dsill/dsi/dsl games

5.Suport Internet?IP phone?MSN, Email functions

6.Florid 3D themes

7.Background music and key music

8.Backup Save file online

9.Support music,movies

R4iTT Kernel and R4iTT 1.41 Updation Installation:

1> Download the latest R4iTT V1.6 kerenel and R4iTT 1.41 Updation;

2> Decompress both of them onto root directory of your Memory card;

3> Get r4i_flashdata.bin and UpdateToolerV13.nds two patches after decompression of R4iTT 1.41

Updation;

4> Do not update your DSi console into V1.41 before these two patches being updated on your R4iTT cart;

5> Power on DSi 1.41 with R4iTT & Memory card inserted;

6> Find and Run UpdateToolerV13.nds;

            7> Do and Follow the Instruction from Screen, and Complete the Updation.

M3i Zero Adapter setup guide for Nintendo DSi

Step 1:

First you will need software for M3i zero card. You can get it downloaded from here :

www.m3adapter.com/Downloads.htm

then see "System for M3i Zero & M3DS Real" and download: System V4.5 Beta X (Europe/USA)

& also download

Core for M3i Zero only:

 M3i Zero Core data file V1.4

Step 2:

You will need winrar/zip program to download , After you have downloaded pl. carry on

Step 3:

Before continuing it is suggested you format your micro SD/ SDHC card in your computer. You may also find it useful to give you micro SD card a volume label when formatting. This makes it easier to identify your card.

-How do you format a drive? Insert Micro SD or SDHC card into USB reader>USB Port>Go to my computer, select the drive, example D: F: > right click>select FAT32>select and click "Quick format" > you should get format ok.

-How do you format a drive? Insert Micro SD or SDHC card into USB reader>USB Port>Go to my computer, select the drive, example D: F: > right click>select FAT32>select and click "Quick format" > you should get format ok.

Step 4:

Once the above downloads are installed ok you should see a "SYSTEM" folder (1st download). Simply transfer it or drag and drop this folder onto the root of your formatted micro SD/SDHC card. In the 2nd download window double click "F-core" and you should see F_CORE.DAT file. Transfer this as well on to the micro sd card's root. Now take the micro sd out and insert in M3i card whilst gently inserting the M3i cable in the small hole on the other side of M3i card.

Step 5:

Now connect the M3i card via small USB cable in your pc and let the red (mostly) or blue flashing light come to an end after 30 seconds.

Thats it. The M3i is now setup and ready to be used.

Support latest 1.4.1 version software

SUPPORT LATEST 1.4.1 VERSION SOFTWARE : iSmart ds , EZ-Flash Vi , DS TWO, M3i Zero , Acekard 2i , R4i Gold , R4i SDHC , R4i Dsi LL , R4iTT , I player , R4i-GOLD , R4Li , EX4

Acekard2.1 or Acekard 2i Instructions

Please follow the steps below to load the Acrkard2.1 or Acekard 2i software.

If you have already had “wrar380” program installed, please proceed to Section (B). You will need this program to unzip or decompress the downloaded files.

Section (A) Download WinRAR program

1. Open your internet explorer or equivalent and type.
2. Click “DOWNLOAD”
3. Click “here” on the following sentence.
4. File Download window will open up, click “Run”.
5. Click “Run” again on Security Window.
6. WinRAR window will pop up, click “Install”.
7. In WinRAR setup, click “OK”.
8. On the next Window then Click “Done”.
9. WinRAR window will open up, close the window.
10. You have successfully downloaded and installed wrar380 program.

Section (B)  Install R4DS Firmware

1. Please download the R4DS software from the following website for the latest version. http://www.acekard.com or from http://www.stuffs4kids.com/category_s/35.htm

 
2. Decompress the downloaded the file using “wrar380” (or higher version) program that has been downloaded and saved in your computer system.

-          Double click on the downloaded file compressed file and WinRAR will be opened up.

-          Select “Extract To” on the top menu bar and follow the instruction and have the firmware decompressed. Please remember the folder or directory where the decompressed files and folders are stored.

3. Copy 1 folders “_ak2” and 1 file “akmenu4.nds” onto your MicroSD root directory.

4. That completes the whole installation.

R4iTT Upgrade Revolution for DS(Dsi xl/DSi II/NDSL/NDS)

R4itt is the first card which is update for ndsi 1.41:
1 DO NOT UPGRADE NDS FIRMWARE BEFORE UPGRADE CARD'S FIRMWARE
2 Download the latest kernel and put into root of tf card
3 put r4i_flashdata.bin and UpdateToolerV13.nds into root of tf card
4 power on NDS
5 enter game list and choose update button
6 run UpdateToolerV13.nds
7 do it by clew on screen

R4itt-MULTI Functions
1.Wi-Fi upgrade firmware for ever
2.Produced by the factories of Original R4 and Original Dstt,
compatible R4(R4i) and DSTT(DSTTi) all funtions.
3.Compatible all dsixl/dsill/dsi/dsl games
4.Suport internet，IP phone，MSN,Email functions
5.Suport dsixl/dsill/dsi/dsl.
6.Florid 3D themes
7.Background music and key music
8.Backup Save file online
9.Support music,movies
Functionality
● Able to memorize and restore to the previously selected game or application after restarting machine and soft reset.
● Sleep mode function, for power saving and longer standby time.
● Multi-languages are optional, they are Simplified Chinese, complicated Chinese, English, Japanese, French, German, Italian, Spainish and Dutch.
● Friendly interface, easy to operate.
● Realtime smart help windows.
● Integrated the latest Moonshell 2.0 Beta version.
● Game compatibility: 100%.
● No need to flash. Built-in launch Slot-2 (gba) function.
● Support SDHC micro sd cards (4GB、8GB、16GB、32GB).
● Support DMA read and no lag while using any microSD card.
● Support FAT16 and FAT32. Files can be transferred with PC, PDA, Cellphone and Camera.
● Support clean rom and drag-drop to play. Fast loading.
● Support NDS and iDS games. DS games can run on any DS versions.
● Files are to be saved directly to TF card, copy or restoration is not required.
● Automatically recognise saved new game types, no need to update the database.
● Support moonshell and home brew.
● Power saving design. Enter optimized mode automatically.
● Double screen UI, abbreviated picture and game title display, button and touch operations.
● Easy to use, setting or adjustment is not required.
● Support Wi-Fi, rumble pack and browser expansion.
● UI background can be changed.
● 4-level brightness adjustment.
● Support soft reset.
● Support AR cheat code.
● Support soft-reset of moonshell 2.0 (back to main menu of R4 NDSI by pressing START button).
● DLDI auto-patching.
● Support Download play.

Hyper-R4i Hyper-Revolution for DS series

Hyper-R4i supports DSi 1.4 System with NEW firmware
What is the Hyper-R4i?
Hyper-R4i is a SLOT-1 flashcard designed for Nintendo DSi (also can be used in DSL&DS) handheld consoles. As the successor of the famous R4 flash card, it now supports the all regions DSi ( JAP/USA/EUR and more) and The Newest System, can use SDHC storage card, and have even better compatibility than the old R4 with NDS ROMs and homebrews.

Functionality
- Core-Duo Upgrade Technology, Firmware and Kernel will be Upgrade forever;
- Crack the Anti-Flashcard technology, all regions DSi console with the Newest System is Compatible;
- Support the microSD memory card (128MB - 32GB*1, Support SDHC);
- Support Clean Rom ( NDS/iDS )，no need any software to trans, drag and drop, Works on any OS.
- Adopt Hyper-R4 Engine, Perfection supports all NDS game*2, Support Download-Play and Wi-Fi Link, included "3369 - Mario & Luigi RPG 3", "3517 - Grand Theft Auto - Chinatown Wars";
- Support DMA read and no lag while using any microSD card*3;
- Build-in R4 SAKURA System, Support ebook/music/movie;
- Files are to be saved directly to microSD card, copy or restoration is not required;
- DLDI auto-patching, support moonshell 1.X/2.X and other homebrew;
- Support AR cheat code ( usrcheat.dat);
- Support soft reset, push L+R+A+B+X+Y to return menu( game list);
- Power saving design. Enter optimized mode automatically;
- Double screen UI, abbreviated picture and game title display, button and touch operations;
- Support Wi-Fi, Rumble pack and Browser expansion;
- UI background can be changed*6;
- 4-level brightness adjustment*7;
- No need to flash, Built-in launch Slot-2 ( GBA ) function*8.
*1 1GByte = 1024MByte = 8192Mbit
*2 Please use the newest firmware and kernel;
*3 Hyper-R4i Team Advise you on using Original microSD/microSDHC card ( for example the SanDisk is a good choose. Good memory card will get good experience;
*4 Rumble pack is purchased and no for DSi ( DSi without SLOT-2);
*5 Browser expansion pack is purchased and no for DSi ( DSi without SLOT-2);
*6 Wallpaper format: bitmap(*.bmp), 256px*192px，16bit。
*7 DSL only;
*8 Flashcard on SLOT-2 only for DS/DSL，no for DSi ( DSi without SLOT-2).