M3i Zero Adapter setup guide for Nintendo DSi

Step 1:

First you will need software for M3i zero card. You can get it downloaded from here :

www.m3adapter.com/Downloads.htm

then see "System for M3i Zero & M3DS Real" and download: System V4.5 Beta X (Europe/USA)

& also download

Core for M3i Zero only:

 M3i Zero Core data file V1.4

Step 2:

You will need winrar/zip program to download , After you have downloaded pl. carry on

Step 3:

Before continuing it is suggested you format your micro SD/ SDHC card in your computer. You may also find it useful to give you micro SD card a volume label when formatting. This makes it easier to identify your card.

-How do you format a drive? Insert Micro SD or SDHC card into USB reader>USB Port>Go to my computer, select the drive, example D: F: > right click>select FAT32>select and click "Quick format" > you should get format ok.

-How do you format a drive? Insert Micro SD or SDHC card into USB reader>USB Port>Go to my computer, select the drive, example D: F: > right click>select FAT32>select and click "Quick format" > you should get format ok.

Step 4:

Once the above downloads are installed ok you should see a "SYSTEM" folder (1st download). Simply transfer it or drag and drop this folder onto the root of your formatted micro SD/SDHC card. In the 2nd download window double click "F-core" and you should see F_CORE.DAT file. Transfer this as well on to the micro sd card's root. Now take the micro sd out and insert in M3i card whilst gently inserting the M3i cable in the small hole on the other side of M3i card.

Step 5:

Now connect the M3i card via small USB cable in your pc and let the red (mostly) or blue flashing light come to an end after 30 seconds.

Thats it. The M3i is now setup and ready to be used.